Airate 2 Pro Twin Fan Speed Controller with Temperature Control

The Gromatrix Airate 2 Pro is a twin fan speed controller with temperature, humidity, light sensor and a Clear LED display. The controller is designed and manufactured in the UK and built to a high standard. The unit maintains a set temperature in your growing environment which can be set by the user, it also includes minimum fan speed control which can be used to ensure a minimum level of air exchange. In addition it has fan differential speed control which controls the difference in fan speed between the intake fan and exhaust fan to help maintain negative pressure preventing air escaping from the grow room. 

  • Gromatrix - high quality and UK designed and manufactured
  • More control for the user of their growing environment
  • Airate 2 Pro controls intake and exhaust fan speed to maintain grow room temperature
  • Clear LED temperature, humidity and settings display
  • Includes a 5m temperature, humidity, light sensor to monitor grow room temperature humidity
  • Includes minimum fan speed control to ensure adequate air exchange in the grow room
  • Set the intake fan to run slower than the exhaust fan using the differential control which ensures that negative pressure is maintained and no unwanted air can leave the grow room except through the exhaust fan
  • Splash proof sockets and enclosure
  • Control two fans with a maximum current rating of 2.5amps per channel

Optional Feature

The unit also includes humidity clearance cycles so when the lights go off and the temperature drops more than 4 degrees below the set point, the controller will turn fans on full for 10 minutes per hour to reduce the humidity build up. This option can be turned on via the gromatrix logger app using the provided cable.

What's Included

  • Airate 2 Pro control unit
  • 5m temperature, humidity and light sensor
  • 2 x hoop and loop cable tidy
  • Data logging cable and software

How the Airate 2 Pro works

The Airate 2 Pro 5amps temperature control, twin fan speed controller automatically controls the speed of the intake and exhaust fan to ensure the users temperate set point is maintained. Airate 2 Pro includes a 5m temperature, humidity and light sensor which can be located in your growing environment in an appropriate place. We recommend placing the sensor amongst your plants.

Airate 2 Pro has two sockets located on the side on the unit with splash proof covers, one socket is for the intake fan and the other is for the exhaust fan.

The end user has 3 control points to set on the front of the controller. The first control knob allows the user to set minimum fan speed, this allows the user to set the required minimum fan speed (slowest speed the fans can run) to ensure adequate air exchange in your grow room even if the temperature goes too low. The second control knob controls the required temperature of your grow room - the unit will maintain your set temperature point. The third control knob controls the differential between the intake fan and the exhaust fan, this helps maintain negative pressure in the growing environment to ensure all air is exhausted out of the exhaust fan and not through gaps or holes.

Once the unit is turned on and set up it will set the fan speeds to the optimum speed to maintain your temperature set point.

The Airate 2 Pro can adjust the speed of fans with a maximum power consumption of 575 Watts (current draw of 2.5 amps) each.

How to set up Airate 2 Pro

  1. Mount the unit on a stable, non-vibratory location to provide full support to the unit using the supplied fixings.
  2. Plug your inlet fan into the 3 pin socket on the side of the unit labelled INLET.
  3. Plug your exhaust fan into the 3 pin socket on the side of the unit labelled OUTLET.
  4. Plug the 3 pin mains cable from the unit into a socket outlet and switch the unit on.
  5. Position the 5m temperature sensor in the middle of you grow room or growing environment. (We recommend positioning in the middle of your plants to get best readings)
  6. Turn the temperature control knob to 35°c fully clockwise.
  7. Turn the fan min knob clockwise until your required minimum fan speed is set. Remember if your minimum fan speed is set too low, there may not be enough fresh air exchange to replenish CO2 for optimal plant growth. Also, having your fan speed too low may not keep the humidity down enough for good plant growth and also may result in the chances of mould or rot during flowering.
  8. Turn the fan differential knob clockwise until your required negative pressure is set.
  9. Turn the temperature knob anti clockwise to set your required grow room temperature.
  10. The unit is now setup, the controller will now maintain your chosen temperature with negative pressure.
  11. The LED display shows the temperature and humidity of your grow area. The LED display can also be used when setting up the controller when you turn a control knob you will see the current setting is displayed this increase and decrease when the control knob is turned this allows you to set the unit up more accurately.

The unit also has a LED indicator

  • A green illuminated LED means the controller is within 1°c of your set point.
  • A red illuminated LED means the controller has been +/- 1°c outside your set point for more than 10 minutes.

Notes

  • The Airate 2 Pro can adjust the speed of fans with a maximum power consumption of 575 watts (current draw of 2.5 amps) each. However, it should never be used to control the speed of a oscillating type fans which generally have their own speed controller. Using the Airate 2 Pro controller to control an oscillating fan could burnout the controller or the oscillating fan itself.


Made In The United Kingdom


Software Download PDF User Manual
Product
Name Airate 2 Pro
Part no AIRATE2PRO
Controls
Temperature Rotary analogue control
Minimum Fan Speed Rotary analogue control
Fan Offset Rotary analogue control
Display
LED Indicator Bicolour LED Green (Within Parameters) / Red (Outside Parameters)
LED Display 3 Green 7 Segment Displays
Output
Number of Channels 2
Max Load Channel 2.5A
Rated Voltage 250V
Socket
Type BS1363
IP Rating IP44
Colour Black
Package contents
User Manual Yes
Fixings 4 Screws and Wall Plugs
Mains
Rated Voltage 250V
Rated Current 13A
Environmental
Operational Temperature 0˚ C - 40˚ C
Storage Temperature -20˚ C - 70˚ C

Write a review

Please login or register to review
  • Brands Gromatrix
  • Model: AIRATE 2 PRO
  • Availability: In Stock
  • £133.00
  • £112.94

  • EX VAT: £94.12


Check Compatibility

Related Products

Airate 1 Grow Room Fan Speed Controller (Max 2.5amps)

Airate 1 Grow Room Fan Speed Controller (Max 2.5amps)

Gromatrix Airate 1 is a 2.5amp variable fan speed controller . The unit is Plug and Play and can be ..

£35.99 EX VAT: £29.99

Airate 2T Twin Fan Controller with Temperature and Speed Controlled

Airate 2T Twin Fan Controller with Temperature and Speed Controlled

Gromatrix Airate 2T is a twin fan speed controller with temperature sensor. The controller is desig..

£59.99 EX VAT: £49.99

Airate 1T Single Fan Speed Controller with Temperature Control

Airate 1T Single Fan Speed Controller with Temperature Control

Gromatrix Airate 1T is a single fan speed controller with temperature sensor. The controller is desi..

£44.99 EX VAT: £37.49

Airate 1 Pro Single Fan Speed Controller with Temperature Control

Airate 1 Pro Single Fan Speed Controller with Temperature Control

The Gromatrix Airate 1 Pro is a single fan speed controller with temperature, humidity, light sensor..

£84.17 £97.99 EX VAT: £70.14